Building details

Hover over the orange circles on the building below to see the names of each building element.

Roof Cladding/Sheeting

Exterior metal panels attached to roof purlins, available in different gauges, colors and profiles.

Valley

Roof condition created by the intersection of the lower part of two roof planes. A hip is created by the intersection of the higher part of two roof planes.

End Wall Girt

Light gauge steel wall member that supports the wall system and horizontally spans between columns along the ends of the building.

X-Bracing

Structural members used to resist lateral forces perpendicular to rigid frames, transmitting them to the foundation. Typically, these are steel rods or angles installed in "X" configurations and found in the roof and walls.

Wall Cladding/Sheeting

Exterior metal panels attached to wall girts, available in different gauges, colors and profiles.

Rake (Gable) Trim

Metal trim piece along the rake of the roof, providing a covering at the end of the roof panel system.

Endwall Frame

Structural steel frame, consisting of columns and rafters located at the endwalls. Supports the girts and beams, and helps to transfer wind loads to the foundation.

Portal frame

Steel frame placed perpendicular to rigid frames along sidewalls for resisting lateral forces. Typically used to allow for openings in the wall.

Eave Strut

Horizontal structural member located at the eave that serves as a strut and as a juncture member for the roof and wall. These are typically cee shaped and made from cold formed steel.

Framed Opening

An opening framed by header, jamb and sill members for the placement of doors, windows, louvers or other accessory. Members consist of light gauge metal or hot rolled steel.

Purlin

Light gauge steel roof member that supports the roof system and horizonally spans between support rafters or beams.

Sidewall Girt

Light gauge steel wall member that supports the wall system and horizontally spans between columns along the sides of the building.

Rigid Frame

Primary structural steel members made from vertical columns and sloped rafters having rigid connections.

Ridge Cap

Metal trim piece along the ridge of the roof, providing a covering for the top ends of the roof panel system.

Mezzanine Joists

Structural floor system support members made from steel open web joists, steel beams or light gauge members.

Mezzanine Floor Decking

Steel decking typically supporting concrete in a floor system.

Multiple Span Columns

Gable frame, uniform depth columns, uniform or variable depth rafters, supported by columns, with ridge at center line.

Roof X-Bracing

Bracing located in the roof to transfer loads to the sturctural steel frames particularly is high wind, snow, and seismic conditions

Pre Engineered Metal Building Details

The parts of a metal building include: Wall cladding or sheeting, Roof cladding or sheeting, Rake or gable Trim, Eave Strut, End-wall Girt, Sidewall Girt, Purlin, Rigid Frame, End-wall Frame, Portal Frame, Framed Openings, X-Bracing, Roof X-Bracing, Ridge Cap, Valley, Multiple-Span Columns, Mezzanine Joists & Mezzanine Floor Decking.

Building with pre-engineered steel structures has many benefits. Whether it’s structural integrity, design, or quick construction, Allied Steel Buildings can provide the right building for your project needs. Allied is the expert building supplier for commercial buildings, commercial garages, storage buildings, industrial buildings, agricultural farm buildings, institutional and government projects. The company supplies prefabricated metal buildings worldwide. With over 5,500 steel structures and metal building kits delivered across the globe over the last decade, you can rest assured that an Allied Building is local to you. All metal buildings supplied by Allied Steel Buildings are expertly designed and engineered to your specifications by our steel building team, who are locally licensed in all states and provinces.

Our buildings meet the International building code requirements, and all Canadian building code requirements. All Allied Steel Buildings are 100% pre-engineered, no cutting or welding is required in the field. We do the work in the factory so you don’t have to! This precision ensures ease of erection on site, no matter how small or how large your structure is, it simply bolts together.

To learn more about our steel building systems, or see more sample projects in your area, please call 877.997.8335. Call us to today for a free estimate and get started on your next metal building project.

Summary
PRE ENGINEERED METAL BUILDING DETAILS
Service Type
PRE ENGINEERED METAL BUILDING DETAILS
Provider Name
ALLIED STEEL BUILDINGS, Telephone No.1.877.997.8335
Area
UNITED STATES, LATIN AMERICA, CARIBBEAN, AFRICA
Description
Allied Steel Buildings provide you in depth knowledge for the specifics of each steel building component.